Polished aluminum surfaces are anodized. Brushed aluminum surfaces are
lacquered. All copper is lacquered.
-
Thickness
All laminates are .035" with the exception of Dekorial Patina and stainless
steel, which are .050".
-
Fabricating
NuMetal™ is fabricated with the same tools used on any high pressure
decorative laminate (special instructions are needed for fabricating stainless
steel, please inquire). NuMetal™ products bond to various substrates - the
same as other high pressure laminates.
-
Adhesives
any contact adhesive or cold set adhesive normally used with decorative
laminates is suitable. Use only naphtha or benzene as adhesive cleanup. Do not
use lacquer solvents or other adhesive solvents which attack lacquer coatings.
-
Storage
Metal laminates should be stored face up in a cool, dry area in a completely
supported flat position. Use a top sheet of chipboard or similar material to
hold stored sheets flat. Edge storage is not recommended.
-
Maintenance
Clean surfaces with a soft cloth using household cleaners, waxes, Windex-type
solutions, or ordinary soap and water. Good furniture or automobile waxes
provides additional protection for all metal laminate surfaces.
-
Fire Rating
Available upon request.
-
Postforming
Many items are available in postforming grade by special order. Please
inquire.
-
Balancing
Counter balancing is necessary as with other high pressure laminates to
prevent warping of the substrate. All NuMetal™ products are at home in any
application where high pressure laminates would be used (vertical or light
horizontal). The possibilities for the interior designer are endless. Signage,
interiors, furniture, displays, fixtures, and more. Our stainless steel series
is even used in exterior signage applications. Sample chains, technical
literature, and product brochures are available. Call our toll free number
1-800-849-1320 for additional information.
